Locomarine NMEA0183 TO ETHERNET CONVERTER, Руководство по установке

Страница: 17 / 21

17
4.4. NMEA SETUP
On this page you can set parameters for NMEA port.
Baud Rate
Port communication speed. Default parameter for most NMEA0183 based device is 4800. Heading sensors, AIS and few other usually use 38400.
Data Speed
NMEA data speed conversion, set 50 as most common version or change if you need different performance.
Local/Remote Port Number
Default Local Port Number is 1001. You will use this port number when you want to access data from RS232 port over IP (e.g. 10.81.255.254:1000). You can change it according your needs.
Remote Port Number is 26 and cannot be changed.
CHAPTER 4 - CONVERTER SETUP