Locomarine NMEA0183 TO ETHERNET CONVERTER, Руководство по установке

Страница: 10 / 21

10
2.2. CONNECTING NMEA0183 DEVICE
To connect NMEA0183 device to Converter use NMEA0183 port as specified bellow.
DEVICE
(NMEA possible labelling)
CONVERTER
TX A / Out A / + / Data A+
TX B / Out B / - / Gnd B-
2.3. CONNECTING RS232 DEVICE
To connect RS232 device (e.g. serial port on computer) to Converter use RS232 port as specified bellow.
PIN layout
2 - RXD
3 -TXD
5 - Ground (GND)
2.4. CONNECTING CONVERTER TO YACHT ROUTER
To connect Converter use supplied Ethernet cable or similar Ethernet cable of your choice. Plug Ethernet cable to any available Vessel Network LAN port on Yacht Router, WIFI Extender or
LAN Expander connected to the system.
IMPORTANT We strongly recommend usage of high-quality CAT6 cable. CAT5 cables are not recommended on installation where cable is longer than 10 meters.
CHAPTER 2 - INSTALLATION