LocoCruiser LC201, Руководство пользователя

Страница: 15 / 18

LocoCruiser standard series decoder user manual Ver1.0
14
-- -- -- -- -- -- 0
Open -- -- -- -- -- 1
-- Open -- -- -- -- 2
Open Open -- -- -- --
3
-- -- Open -- -- -- 4
Open -- Open -- -- -- 5
default -- Open Open -- -- -- 6
Open Open Open -- -- -- 7
-- -- -- -- Open -- 16
Open -- -- -- Open -- 17
-- Open -- -- Open -- 18
-- -- Open -- Open -- 20
-- Open Open -- Open -- 22
Open Open Open -- Open -- 23
-- -- -- -- -- Open 32
Open -- -- -- -- Open 33
Open -- -- -- Open 34
Open Open -- -- -- Open
35
-- -- Open -- -- Open
36
Open -- Open -- -- Open 37
-- Open Open -- -- Open 38
Open Open Open -- -- Open 39
-- -- -- -- Open Open 48
Open -- -- -- Open Open 49
-- Open -- -- Open Open 50
Open Open -- -- Open Open 51
-- -- Open -- Open Open 52
Open -- Open -- Open Open 53
-- Open Open -- Open Open 54
Open Open Open -- Open Open 55
6.Decoder Settings (Programming)
6.1 Configutation Variables (CV)
Almost all configuration Variables (CVs) LocoCruiser decoders follow the CV concept
developed in the US. CV stands for “Configuration Variable” and indicates that the storage
cells described above are not only variable but they also determine the behavior of the
decoder.
6.1.1 Standardisation in the NMRA
The NMRA ( National Model Railroad Association) has defined which CVs determine certain
parameters of a decoder. The DCC standard allocates fixed numbers for certain CVs
( adherence is obligatory). This greatly simplifies things for the user since decoders of most
manufacturers comply with this standard and therefore dealing with CVs requires the same
process with the same CV-numbers regardless of the manufacturer.
The DCC concept permits to enter numbers ranging from 0 to 255 into CVs. Each CV carries
only one number. While the position number is predetermined, the range of values may vary.