Lockly DEADBOLT EDITION PGD1128, Руководство по установке

Страница: 15 / 28

7.1:
While the door is open and deadbolt is
extended, place the ribbon inside the
compartment and insert only 3 batteries at
the bottom layer with correct polarities.
Ensure the bolt is FULLY EXTENDED
7.2
Press and hold the program button
before inserting the 4th battery. The lock will
automatically do a self-check. RELEASE the
program button. The lock information wil l be
shown on the touchscreen . The self-check
process is very important to ensure the
installation is done properly.
After the lock finished the self-check, do the 2-steps below to ensure your lock is properly installed:
STEP 7. INSTALLING BATTERIES
1. Manually lock and unlock your door by using
the thumb turn and the key to make sure the
deadbolt moves smoothly. If you feel that there
is a tight tension while you are turning, it means
that the lock may have not been installed
straight. Go back to Step 2 and re-install the
lock.
IMPORTANT: If your lock is not properly installed,
it will open and close repeatedly at times and/
or it will reduce battery life.
7.3: After you checked that the lock manually
lock and unlock properly and deadbolt moves
smoothly, continue to install the last 4 batteries
on the top layer of the battery compartment.
2. Swipe your hand across the touch screen keypad,
the lock will close. If the deadbolt bounces and
unlocks automatically , it means that your lock was
installed incorrectly. Go back Step 2 to make sure
your lock was installed with the (a) deadbolt
extended and (b) the torque blade was inserted
vertically while the deadbolt was extended.
7.4: Install the Battery Cover (I) and secure with
screw.
PRESS & HOLD
1 2 3
4
5 6 7 8
5 6 7 8