Lockly DEADBOLT EDITION PGD1128, Руководство по установке

Страница: 12 / 28

5.1 The Interior assembly comes with
pre-installed wired door sensor for right
swing doors with 2 ¾" (70mm) backset*.
Discard the excess part (e) for doors with
2 ⅜" (60mm) backset as shown below:
5.2 For left swing doors, re-route the door
sensor wire through the side channel. Pull
the foam pad (f) then re-insert to secure
the wire. Discard the excess part (e) for
doors with 2 ⅜" (60mm) backset as
shown below:
*Backset - measure the distance of the door edge to the center of the door hole.
DO NOT INSTALL THE SENSORS YET >
Pull
Insert
P P
f
STEP 5. PREPARING DOOR SENSORS FOR INSTALLATION
3
2
1
e