Ratings
6
Maximum allowed working pressure is located on the rating plate.
NOTICE
Figure A High Altitude Label Location
Model Number
Note: Change “N” to “L” for
L.P. gas models.
CSA
Input Modulation Btu/hr
Water
Content
Gallons
Water Connections
Gas Connections
Vent/Air Size
Inlet
Outlet
(Note 2, 3)
(Note 1)
AWN1000
100,000 - 1,000,000
8.4
2"
3"
1 1/2"
6"
AWN1300
130,000 - 1,300,000
10.0
2"
3"
1 1/2"
6"
AWN1500
150,000 - 1,500,000
11.4
2"
3"
1 1/2"
6"
Notes:
1. Armor X2 water heaters require special gas venting. Use
only the vent materials and methods specified in the
Armor X2 Installation and Operation Manual.
2. Standard Armor X2 water heaters are equipped to
operate from sea level to 4,500 feet
only
with no
adjustments. The water heater will de-rate by 4% for
each 1,000 feet above sea level up to 4,500 feet.
3. High altitude Armor X2 water heaters are equipped to
operate from 3,000 to 12,000 feet
only
with no field
adjustments. The water heater will de-rate by 2% for
each 1,000 feet above 3,000 feet. High altitude models
are manufactured with a different control module for
altitude operation, but the operation given in this manual
remains the same as the standard water heaters. A high
altitude label (as shown in FIG. A) is also affixed to the
unit.
4. The manual reset high limit provided with the Armor X2
is listed to UL353.
Installation & Operation Manual
HLW
LOW LEAD CONTENT
Содержание Armor X2 AWL1500
Страница 66: ...Notes Installation Operation Manual 66...
Страница 67: ...Notes Installation Operation Manual 67...
