LNS 326 S2, Руководство для стартапов, Страница: 8 / 17

START UP MANUAL 7
HYDROBAR EXPRESS 326 S2
Note :
Depending on
lathe
configuration,
there may be
other
parameters
available.
For further
information,
see chapter 8 /
point 5.
3. SETTINGS RELATED TO BAR STOCK AND MACHINED PARTS
3.1 Parameters settings
Example 1 : Set-up for round bars
Bar profile round
Bar diameter 20 mm
Guiding channel diameter 24 mm
Length of pieces to be machined 37.0 mm
Thickness of the cutoff tool 2.0 mm
Press the [ MENU ] key; the remote command displays the following text :
PARAMETERS RELATED TO START-UP
Press the [
ENTER
] key; the remote command displays the following text :
BAR STOCK DIAMETER :
On the keypad enter [20]
Press the [
ENTER
] key twice
GUIDING ELEMENTS DIAMETER
On the keypad enter [24].
Press the [
ENTER ] key twice, the remote command displays the following text :
INPUT OVERALL PART LENGTH
On the keypad, enter [39], which represents the sum of the bar length and the thickness of
the cutoff tool.
Press the [ ENTER ] key twice to store the data. Press the [ ESC ] key to exit the set-up
functions.
Press the key attributed to the icon
[PAGE DOWN]
.
The remote command displays the following text :
ADDITIONAL PARAMETERS RELATED TO START-UP
Press the [ ENTER ] key, the remote command displays the following text :
ROUND / PROFILED MATERIAL
Select [
ROUND
]. Press the [
ENTER
] key twice to store the data.
In automatic mode, when the bar is guided by the front rest, the motor (M3) adjusts the
front-rest gap according to the setting entered into the [BAR STOCK DIAMETER]
parameter. Similarly, when the pusher is in the front rest, the motor [M3] adjusts the gap
according to the setting entered into the [GUIDING ELEMENTS DIAMETER] parameter.
Press the [
ESC ] key to exit the set-up functions.