G Series Gas Grills
LTR50001050, Rev. M
Appendix
www.calflamebbq.com
28
Converting from LP to NG
All Cal Flame grills are manufactured as standard liquid propane (LP) grills and can be converted to burn natural
gas (NG). However, Cal Flame G Series grills do not include a conversion kit and it must be ordered separately.
You can find ordering information on page 31.
There are two steps required to convert a grill from LP to NG.
You must perform both steps.
Step 1: Switching the regulator behind the grill
Step 2: Changing the burner orifices
The conversion kit may include
some or all
of the parts shown at
right, depending on the size and model of your grill.
The kit contains orifices to convert main burners, rear infrared
burners, and the large infrared burner. Your kit will have only the
parts you need to convert your grill.
Before you begin, make certain the LP gas source has been
disconnected from the grill.
To gain access to the NG regulator, tilt the grill forward.
You will need:
• Pipe wrench
• Regulator
• Pipe compound suitable
for natural gas
WARNING! You must have an authorized service technician perform this procedure .
If these instructions are not followed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life . Lloyd’s Material Supply (LMS) will not
be held responsible for an improperly converted gas grill .
1. Remove the LP gas line and LP gas fitting from end of manifold.
2. Attach NG regulator to end of manifold.
Step 1: Attaching the regulator behind the grill
