G Series Gas Grills
LTR50001050, Rev. M
Installation and Connection
www.calflamebbq.com
12
Note: This is only necessary if you
have a side burner.
a . Assemble the T Connection
Items required for connection (NOT
included with your grill):
• One 3/8” T adapter
• One or two 1/2” to 3/8” flare
reducers
• Two 3/8” flex lines
• LP gas line with regulator OR
3/8” NG flex line
Connect two 3/8” flex lines to the
ends of the T connector that will
connect with the grill and side
burner. Connect either a third flex
line (if you are using NG) or a LP
gas line (if you are using LP) to
the third end of the T connector as
shown at right.
b . Connect to the grill
The gas manifold for the convection
grill can be configured for both LP
and NG. Make sure you connect
to the correct fitting depending on
your gas type. Connect to gas line
to the grill as shown in step 3.a
above.
c . Connect to the side burner
Connect the flex line from the T
connector to the 1/2” to 3/8” flare
reducer fitting on the side burner gas line. No regulator is required for either LP or NG.
Connect to
NG gas source
3/8” tee adapter
3/8” flex line
3/8” flex line
Connect to grill
Connect to
side burner
3/8” flex line
NG CONNECTION
IIIII
IIIII
IIIIIIIIIIIIIIII
IIIII
IIIII
IIIII
1/2” to 3/8” reducer
Connect to
propane tank
3/8” tee adapter
3/8” flex line
3/8” flex line
1/2” to 3/8” reducer
IIII
IIIIIIIIIII
Connect to grill
Connect to
side burner
Black LP gas line
with regulator
LP CONNECTION
IIIII
IIIII
IIIII
IIIII
3 .
Connect the Gas Line to the Grill and Side Burner
