20
Similarly, the Pump Control Points can be displayed while in the ‘RUN’ Mode by pressing the ‘Pump A’ or ‘Pump B’ keys
once.
Press
and the following screens display:
+3 Seconds
4.6
Advanced Menu:
Holding the
key for five (5) seconds accesses the ‘Advanced Features’ Menu, and allows these settings to be
changed.
Press the ‘DISPLAY/MENU’ key for five (5) seconds while the controller is in the ‘EDIT’or ‘OFF’ mode.
The first item displayed is the software revision. Pressing ‘Display/Menu’ again cycles to the first option. The first number
is the option. The second is the setting. Use the
to change the setting.
The Option Board (37830) is required for Option 6.
Option Setting
1
1
Control returns to
Run
60 seconds after last keypress
0
Run/Edit
key is
On/Off
2
1
On/Off
Control
0
Proportional
Control (and
On/Off
)
2
Proportional
Control
3
1
Point 3 Programming Enabled
0
Point 3 Programming Disabled (Two point only)
4
1
Solenoid programmed to switch on after programmed time‘DELAY 1’ and to switch
Off
after programmed time ‘DELAY 2’
0
Solenoid Disabled
5
1
(NA)
0
6
1
mA Enabled - Option Board must be fitted
0
mA Disabled
7
1
Allows editing of #5 & #6
0
Lockout #5 and #6
(866) 433-6682 • (281) 359-8538 • [email protected] • www.novatech-usa.com
