LMF Manufacturing America's Heat AH-100, Руководство пользователя

Страница: 5 / 30

4
STORAGE BIN
1. After removal of shipping container, position storage bin on storage bin base, at desired
angle for installation. For bolt together - fabricated metal hopper stand, see page 16.
2. Install auger assembly by sliding auger boot (with clamp) over bin outlet; align elbow on
bin auger tube directly over furnace fuel inle
t. Tighten auger boot clamp securely. It is
advisable to install two sheet metal screws (not supplied
) thru the clamp, auger boot, and
into the hopper bin outlet to insure a permanent connection. Install fuel delivery coupler
between bin auger tube and furnace fuel inlet.
3. Fasten flex conduit extending from stor age bin auger assembly to furnace auger motor
housing using conduit lock nut.
4. Connect one black auger motor lead to the two orange wires with wire nut connector.
Connect the other black auger motor lead to the two white wires using wire nut connector.
(See Figure 1)