LMC Systems DOM 510 RD, Руководство по эксплуатации

Страница: 17 / 62

12V operation
12V operation is possible only during a journey,
when the engine of the towing vehicle is running.
– Switch off gas operation if appropriate.
– Switch on toggle switch (1). Toggle switch will
turn red.
Note
During a journey the refrigerator should only be
operated with 12V current and not with gas.
230V operation
Check with the fault-current circuit breaker
whether there is a proper 230V connection to the
caravan.
– If appropriate, switch off gas or 12V operation.
– Switch control knob (3) to setting 7.
– Press toggle switch (2). Toggle switch will turn
green.
Gas operation
(piezo ignition)
– If appropriate, switch off 12V/230V operation.
– Open gas shut-off valve.
– Press in rotary knob (4) and rotate to the “flame”
symbol.
– Set control knob (5) to setting 5.
– Hold the rotary knob (4) down, and at the same
time press in the igniter button (6) every two
seconds until the flame is burning.
– Hold the rotary knob (4) pressed in for approx.
10-15 sec until the safety pilot has been over-
ridden and gas flows into the burner. The gas
supply will then be automatically held open.
It is possible to check whether the flame is burn-
ing by looking through a viewing glass on the bot-
tom left-hand side inside the refrigerator. If the
flame goes out, repeat the ignition process.
Gas operation with automatic ignition system
Turn switch (6) to 1. The LED in the switch will
flicker. Hold rotary knob (4) down until LED in
switch (6) goes out. Hold rotary knob (4) pressed
in for another 10-15 sec.
15