LJ Star LumiStar 1000, Инструкция по установке и эксплуатации

Страница: 5 / 8

Manual: 02-0158 - IOM
4
05/22
4.00 Electrical Installation
4.10 Supply Requirements
Voltage: 12-24V AC/DC – Regulated
Power: 12W
4.11 Notes
CE compliance is achieved only with use of power supply components pursuant
to the EMC directive (2014/30/EU) and, if applicable, the Low Voltage
Directive (2014/35/EU).
Recommended - Connect supply to separate branch circuit to avoid potential
interference from adjacent equipment.
4.20 Electrical Connection
4.21 M12 Connector – for Remote Push-Button Operation
WARNING
ELECTRICAL CONNECTIONS MUST BE MADE WITH NO POWER
SUPPLIED TO LIGHT. FAILURE TO DO SO COULD RESULT IN PERSONAL
INJURY AND/OR PROPERTY DAMAGE.
- 5-pin, A-type M12 connector cable (3-meter length) is supplied with
Luminaire.
- Connect cable to light. Connect free wires per chart below.
- Unit is internally wired ready for operation.
Brown Blue Gray Black White
+Vin -Vin GND Ext. Switch Ext. Switch
4.22 Standard Electrical Connection
WARNING
ELECTRICAL CONNECTIONS MUST BE MADE WITH NO POWER
SUPPLIED TO LIGHT. FAILURE TO DO SO COULD RESULT IN PERSONAL
INJURY AND/OR PROPERTY DAMAGE.
- Equipped with a factory mounted cable gland. Supplied with a 3-meter
power cable.
- Connect red wire to +Vin. Connect black wire to -Vin. Connect bare wire to
GND.
- Unit is internally wired ready for operation