7
0800 422 274
NZ
Unpacking
• Unpack:
This product has been packaged to protect it against
transportation damage. Unpack the appliance and keep the original
packaging carton and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future, and you can
use it to store the appliance when it is not in use.
• Installation hardware:
Watch out for a some screws, which you will need
for assembling the base.
• Safe packaging disposal:
Plastic wrapping can be a suffocation hazard
for babies and young children, so ensure all packaging materials are out
of their reach and disposed of safely. In the event that the carton is to be
disposed of, please recycle it where possible.
• Check power cord:
Unwind the cord to its full length. Inspect the power
supply cord and plug, and all other parts of the appliance, for
visual
damage. Do not use the appliance if anything appears to be damaged or
not working properly.
In case of damage, contact our after sales support
centre using the details at the bottom of the page.
• Read instructions:
Make sure you have read and understood all instructions
and warnings in this manual. Refer to the Product Overview, opposite, to
familiarise yourself with the product and identify all parts. Pay particular
attention to the safety instructions on the previous pages.
Assembly
The base of the heater comes detached and must be assembled prior to use.
WARNING!
Do not connect the heater to the power supply until the base is
securely attached. Only operate the heater in an upright (standing) position.
• Carefully place the heater on a table or benchtop with the bottom part
overhanging so you can affix the base.
• Leading the cord through the centre hole,
push the base onto the bottom of the
heater’s main body, aligning the cut-outs
in the base with the three screws. Affix the
base to the heater body using the large
screws provided (Fig.1). Guide the cord
gently out of the base through the cut-
outs, then protect the cord using the cover
supplied (Fig.2).
• Turn the fan the correct way up and place
it on a level and dry surface for operation.
Getting Started
Fig. 1
Fig. 2
