Frequency x
xxxx.xx Hz
50mW
45 J/LD
CW
Keep the SET-key pressed for 2–3 sec. to enter the frequency setting mode.
You can set the desired frequency (1 - 9,999 Hz) with the “+/–” and SET-keys.
First the thousands digit, then the hundreds digit, etc. Once the desired
frequency has been set, confirm with the SET-key (keep pressed for 2–3 sec.).
The frequency is now transferred to the treatment screen on the display (at
first as a flashing value). The frequency is stored with the SET-key and displayed
on the screen.
A set value remains in the memory until it is overwritten by another frequency.
After the treatment mode has been set, the display changes to the following
screen:
The energy dose rate can be changed with the “+/–” keys. The SET key
confirms the selected value. The selected dose automatically is being
converted into the corresponding therapy time required for the selected
output.
page 12 of 29
50mW
15:00
CW