50 mW
45 J/LD
CW
6. Changing of laser parameters
Having pressed the SET key, the output value is blinking as highlighted in below
figure. Changes can be made by pressing “+/-“-keys accordingly. Settings can be
done from 10% to 100 % (in regard to the maximum value) in increments of 10%.
By pressing the SET key again, the selected value is confirmed and stored. The
display changes, showing the following information.
The therapy program can be changed with the “+” and “–” (page 4, fig. 1/3) keys
and saved with the SET key.
The setting options are:
● CW ● Multifrequency ● Alphafrequency ● Nogier-Frequencies A-G, L
● Nogier-Frequencies pot. A‘-G‘ ● Bahr-Frequencies 1-7 ● Reininger-
Frequencies ● free programmable frequencies 1-9.999 Hz.
New frequencies (purchase optional): ● Bahr+, ● Solfeggio-frequencies
● FI-bands (FI: Regeneration, Pain, Interference, Trauma, Inner Center, Detox, In-
fection, Bones, Nerve, Transcranium, Psyche/Vegetativum, Lymph, Trigger Points)
● Sweeps (Sweep: Alpha, Purr, Beta, Theta, Delta) ● Cranio
Please note: therapy programs and frequencies on pages 22-23, appendix 1
page 10 of 29
50mW 45 J/LD
CW