An individual frequency can be set like this
When the value is flashing on the display, use the “+” or “-“ keys to select the
frequency programm you want and press the key SET for 2-3 seconds. This is
how you get to the setting mode for individual frequences. With the +/- keys
you then can select the desired frequency and confirm with pressing the SET key
again. Further pressing the SET key will transfer the selected frequency to the
treatment display.
Example: you want to select the „Nogier E“ frequency:
1. After booting is finished, use the arrow-key to select the program mode
*Therapy program*.
2. The mode currently selected shows a black background and is flashing.
3. Select the Nogier-Frequency using the „+/-„ key. The display now shows:
*Nogier xxxxx*
4. Press the arrow-key for 2-3 seconds. The display now shows in the first line
the frequency *Nogier* and in the 2nd line the currently selected program.
5. Select *Nogier* by means of „+/-„ key. The display now shows a black back-
ground and the value is flashing.
6. Press the arrow-key twice, the 2nd line of the display now shows *Nogier E*.
The value is not flashing any more and you're being forwarded to the setting
mode *dose/time*.
The frequencies Bahr and Reininger can be selected accordingly.
The newly programmed frequencies Bahr+ and Solfeggio can be set analogous
to the Nogier frequqencies.
Setting a freely programmable frequency:
T
wenty memory locations (FP1 to FP20) are available for freely programmab-
le frequencies. When the value flashes, press the “+” or “–” key to enter the
frequency program FP. Keep the SET key pressed for 2–3 sec. to get to the
“Programmable” screen on the display.
page 11 of 29
Programmable
FP1:xxx Hz