Livestrong LSPRO1, Руководство пользователя

Страница: 9 / 57

16 17
BOLTS (A)
SPRING WASHERS (B)
LEFT CONSOLE MAST
LEAD WIRE
CONSOLE CABLE
ARC WASHERS (C)
MAIN FRAME BRACKET
RIGHT CONSOLE MAST
LS PRO 2 ASSEMBLY STEP 1
A Open HARDWARE FOR STEP 1 .
B Pull
LEAD WIRE
through
RIGHT CONSOLE MAST
.
After pulling the LEAD WIRE through the mast, the
top of the CONSOLE CABLE should be located at
the top of the mast. Detach and discard LEAD WIRE .
C Place RIGHT CONSOLE MAST over MAIN FRAME
BRACKET
.
D Attach CONSOLE MAST to MAIN FRAME
BRACKET using 3 BOLTS (A) , 3 SPRING
WASHERS (B
) and 3
ARC WASHERS (C)
.
E Repeat steps C–D on other side.
NOTE: Do not pinch console cable when placing
the mast onto the main frame bracket.
BOLT (A)
20 mm
Qty: 6 SPRING WASHER (B)
8.2 mm
Qty: 6 ARC WASHER (C)
8.4 mm
Qty: 6
HARDWARE FOR STEP 1 :
LS PRO 2 ASSEMBLY STEP 2
A
Open HARDWARE FOR STEP 2 .
B
Feed HANDLEBAR CABLE through
CONSOLE MAST BRACKET and out through
the top of CONSOLE MAST .
C
Slide HANDLEBAR onto CONSOLE MAST
BRACKET and attach using 3 BOLTS (A) ,
3 SPRING WASHERS (B) and 3 FLAT
WASHERS (D) .
D Repeat on other side.
BOLT (A)
20 mm
Qty: 6 SPRING WASHER (B)
8.2 mm
Qty: 6 FLAT WASHER (D)
8.2 mm
Qty: 6
HARDWARE FOR STEP 2 :
BOLTS (A)
SPRING WASHERS (B)
HANDLEBAR CABLE
CONSOLE MAST
FLAT WASHERS (D)
HANDLEBARS
CONSOLE MAST BRACKET
NOTE: Be careful not to pinch any wires
while attaching the handlebars.
NOTE: Do not tighten bolts until step 3 is complete.
LS PRO
2
LS PRO
2
LSPRO1and2_OM_Rev1_9.indd 16-17 8/22/11 4:02 PM