Livestrong LSPRO1, Руководство пользователя

Страница: 8 / 57

14 15
SCREWS (E) MAIN FRAME BOOT
BOLTS (F)
END CAPS
LS PRO 1 ASSEMBLY STEP 4
A
Open HARDWARE FOR STEP 4 .
B Attach MAIN FRAME BOOTS using 4
SCREWS (E) .
C Attach END CAPS using 6 SCREWS (F) .
SCREW (F)
15 mm
Qty: 6 SCREW (E)
20 mm
Qty: 4
HARDWARE FOR STEP 4 :
BOLTS (A)
SPRING WASHERS (B)
CONSOLE
CONSOLE MAST
ARC WASHERS (C)
CONSOLE &
HANDLEBAR
CABLES
LS PRO 1 ASSEMBLY STEP 3
A
Open HARDWARE FOR STEP 3 .
B
Gently hold the CONSOLE above the
CONSOLE MASTS .
C
Connect the CONSOLE & HANDLEBAR
CABLES , carefully tucking wires in masts to
avoid damage.
D Attach each side of the CONSOLE using 3
BOLTS (A) , 3 SPRING WASHERS (B) and 3
ARC WASHERS (C)
.
E
Fold the deck into the upright position until
the foot latch engages. Rotate the
CONSOLE
MASTS until the spacing between the
handlebars and the deck are the same. Tighten
BOLTS from step 1 and then step 3.
BOLT (A)
20 mm
Qty: 6 SPRING WASHER (B)
8.2 mm
Qty: 6 ARC WASHER (C)
8.4 mm
Qty: 6
HARDWARE FOR STEP 3 :
YOU ARE FINISHED!
This treadmill has a pre-waxed belt and
should never be lubricated or waxed.
Lubricating or waxing the belt can cause
damage that is not covered by the
warranty.
IMPORTANT
LS PRO
1
LS PRO
1
LSPRO1and2_OM_Rev1_9.indd 14-15 8/22/11 4:02 PM