6
7
ASSEMBLY
STEP 1
A
Cut the yellow banding straps and lift the
running deck
upward until the
foot
latch
locks. Remove all contents from
underneath the running deck.
B
Open
hardware bag 1
.
C
With the
running deck
in the raised
position, attach the
left console mast
to the
base frame
using 4
bolts (a)
,
4
spring washers (b)
and 4
flat
washers (c)
.
BOLT (A)
20 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (C)
15 mm
Qty: 4
HARDWARE BAG 1
CONTENTS :
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
LEFT
CONSOLE
MAST
BASE FRAME
RUNNING DECK
FOOT LATCH
ASSEMBLY
STEP 2
A
Open
hardware bag 2
.
B
Pull
lead wire
through
right console
mast
. After pulling the lead wire through the
mast, the top of the
console cable
should
be located at the top of the mast. Detach and
discard the lead wire.
C
With the
running deck
in the raised
position, attach the
right console
mast
to the
base frame
using 4
bolts
(a)
, 4
spring washers (b)
and 4
flat
washers (c)
.
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
BOLT (A)
20 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (C)
15 mm
Qty: 4
HARDWARE BAG 2
CONTENTS :
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
RIGHT CONSOLE MAST
CONSOLE CABLE
LEAD WIRE
BASE FRAME
RUNNING DECK
