3
Get foamin’!
3
/
4
" (1.9 cm)
x4
Secure the foam maker using (4)
3
/
4
”
(1.9 cm) screws in the (4) locations.
7
C
First, turn the table upside down.
FOR CORRECT POSITIONING: align
notches in the foam maker (part C) to
the notches in the table. Align the On/
Off button to the circular
indent in the table.
2
Press firmly into place (battery
cover should be facing up).
3
You installed the
batteries- right?
WAIT!
Bottom foam maker part is
keyed to fit into table.
IMPORTANT: flip table
upright and check to
be sure the foam maker
notches are snapped
over the table edge.
1
