11
12. Attach the Castors.
You need:
8x Small Screws for Castors (11mm), 4x Castors and a Screwdriver.
Carefully turn the Drawer over and attach the 4x Castors to the Base with the 8x Screws
(11mm) as shown below. Finally turn the Drawer over and carefully slide it into the bed
Assembly.
13. Fit the Mattress Base.
You need:
34x Large Screws (25mm) and a screwdriver.
Carefully Lift the Mattress Base onto the Bed (webbing faced down) pull the Mattress Base up
to one End, then spread that slats out evenly. Use the 34x Large Screws to secure the base to
the bed through the holes in all slats.
