9
10. Assembling the drawer.
You need:
4x Small Cam Pins, 4x Small Cams, 4x Screws for Drawer Carcass (35mm) and a
Screwdriver.
Fit 4x Cam Pins into the Drawer Front. Place the two Drawer Sides onto each Drawer front
ensuring that all Cam Pins and pre-fitted Dowels are correctly engaged into their
corresponding holes and fit 4x Small Cams into each Drawer Side (as shown).
Insert the Drawer Back by slightly leaning the Drawer Sides outwards. Pre-fitted Dowels in
the Back must be located into the corresponding holes on the inside face of each Drawer
Side.
Note:
The Cams that attach the Drawer Fronts to the Sides can be loosened to make it
easier to fit the Back.
Once in position, fit the 4x screws (35mm) as shown below to secure the Back to the Sides.
Dowel holes must face inwards
10
11. Drawer assembly continued.
You need:
7x Screws for Drawer Carcass (35mm) and a Screwdriver.
Ensure the Drawer frame is square and carefully fit the Draw Base. The lip on the Base
locates into the groove on the back of the Front. Once in position and all holes are aligned
correctly, secure the Base to the Drawer Frame using 7x Screws (35mm) (as shown below).
