Product Safety
Care of your Product
Welcome
Product Care
Customer Service 01985 300588
Clean your cabin bed by wiping with a damp cloth & drying with a soft cloth.
Never clean with abrasives, chemical cleaners or household polishes.
Take care when handling or moving the Bed. Careless handling can damage wooden furniture.
Try to lift rather than drag.
If you have a problem with this product, please call our Customer Service Team who will be
glad to help.
We can usually provide replacement and / or spare parts promptly; it will help us if you can
identify the specific part using the check list in the next section.
Thank you for buying the Frooti Cabin bed
Before beginning assembly, please take a few minutes to read these instructions.
Lay the parts out on a clean, soft, flat surface (such as a carpeted floor) and compare with the
parts check list on the next page. Do not throw away any packaging until you are sure that you
have all the parts.
The product must be assembled by an adult. There are small parts so keep small children
away from the assembly area. Some stages of assembly require more than one person.
The recommended size of the mattress is 191cm x 90cm (6'3" x 3'0")
If, for any reason, you wish to return the product, you must disassemble the components and
use the original packaging.
Our Customer Service Number: 01985 300588
PLEASE READ CAREFULLY & KEEP FOR FUTURE REFERENCE
Frooti Cabin bed
Code: CBD001
2
l
Periodically check all fittings to ensure that none have come loose.
l
Keep away from direct sources of heat, such as electric, gas or coal fires.
l
Do not allow children to Climb on the furniture.
l
Using this furniture other than for its intended purpose could cause damage
to the structure or serious injury to your child.
l
The Bed should not be used if any structural part is broken or missing.
l
If you can manage it, please try to persuade your children not to bounce on
the bed.
l
Warning: The child`s bed should not be placed too close to other furniture or
windows, blind cords, curtain pulls or other strings or cords, and should be
placed either tight to any wall or have a gap of 300mm between the wall and
the side of the bed.
