6
ENG
4 . K E E P Q U I E T D U R I N G A
MEASUREMENT TO OBTAIN THE
ACC U R AT E VA LU E S O F YO U R
B LO O D P R E S S U R E W I T H T H E
ELECTRONIC DEVICE. Measure your
blood pressure in the calm and
comfortable conditions at the indoor
temperature. No eating an hour
before measurement; no smoking,
taking tonic agents, alcohol 1.5-2
hours before measurement.
5. The accuracy of blood pressure
measurement depends on whether the
cuff matches the size of your arm. THE CUFF SHOULD NOT BE TOO SMALL OR TOO
LARGE.
6. Wait 3 minutes between measurements for the blood to restore its circula-
tion. However, the persons with prominent atherosclerosis due to consider-
able loss of vascular elasticity may need to increase the wait time between
measurements (10-15 minutes). This also refers to the patients suff ering for
long from diabetes.
For more accurate determination of blood pressure it is recommended to make
a series of 3 consecutive measurements and to use the average value.
POWER SUPPLY OF THE DEVICE
BATTERY INSTALLATION
1. Open the cover of the battery compartment
and install 4 “AA” size batteries according to
polarity marked inside the compartment. Do not
use much force to remove the cover of the battery
compartment (fi g. 3).
2. Close the battery cover.
• Replace all batteries when the Low Battery Indicator
“
” appears on the screen or when there is no
any indication on the screen. The Low Battery
Indicator does not show the discharge level.
The batteries supplied with the Device are intended for check of the
Device performance at sale and their service life may be shorter than of the
recommended batteries.
• Replace all four batteries at the same time. Do not use the waste batteries.
• If the Device is unused for a long time, remove all batteries.
• Do not leave the waste batteries in the Device.
Fig.3
Fig.2
