å
Fasten one of the DOORS (M) to the RIGHT FRONT LEG (C). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
NOTE: Be sure the HINGES are even with the front edge of the LEG.
å
Fasten one KNOB (5K) to the DOOR (M). Use one GOLD 1" MACHINE SCREW (50S).
å
Repeat this step for the other DOOR.
å
Apply the LABEL (17L) to the DOOR (M). You should be able to read the label when the
door is open. When the door is closed, it will hide the label. Peel off the backing and
apply the label as shown in the diagram.
å
NOTE: This is a permanent label intended to last for the life of the product. Once
applied, do not try to remove it.
Step 17
BLACK 9/16" LARGE HEAD SCREW
(8 used for the HINGES)
1S
C
M
The STRIKE PLATE
must be here.
5K
GOLD 1" MACHINE SCREW
(2 used for the KNOBS)
50S
17L
425616
www.litterbox.com/support
Page 21
