å
Insert four METAL PINS (1R) into the holes in the LEGS (C
and D) or LEGS (E and F) according to your choice for the
litter-robot® opening. Set the END PANEL (A) against the
METAL PINS so the SHELF SNAPS are resting on the METAL
PINS. Push on the END PANEL until each METAL PIN "snaps"
into the SHELF SNAPS.
å
NOTE: If you wish to change the location of the END PANEL,
tap the PANEL out with the palm of your hand.
Step 15
Opening on the left
Opening on the right
C
E
F
A
A
1R
D
1R
425616
www.litterbox.com/support
Page 19
