Lithium Grim Sultan of Tone, Инструкция по сборке

Страница: 10 / 12

Sultan of Tone v4.1
10
Diode switch settings
Instead of using the dipswitches, you can make either 4 external SPDT switches for or 2 DP3T
switches. If you choose 4 separate switches, it will look something like this:
A/B/C/D
Switches A, B, C, D can all be connected the same way as shown in the picture above. All ways of
connecting both wires to the switch are valid as long as you do not connect it to both outer lugs.
The switch settings are independent of using DIP or separate switches and are as follows:
Channel Red Orange
Switch A B C D
Clean OFF OFF OFF OFF
OD ON OFF ON OFF
Distortion X ON X ON
X = setting is irrelevant, either ON or OFF
So If you want an OD Red channel and a distortion Orange channel then it is:
A :ON B : OFF C : X D :ON
You can also use a DP3T switch per channel to select OD (Up)/Clean (Middle)/Distortion (Down). You
will need an ON/OFF/ON switch for that and wire it like this:
A
B
C
D
Red Channel
Orange Channel