Lithium Grim Sultan of Tone, Инструкция по сборке

Страница: 11 / 12

Sultan of Tone v4.1
11
Troubleshooting
All PCB’s have been 100% factory e-tested and out of every batch I receive I build a effect to double
check, so there should not be a connection problem on the PCB itself.
The board is not working (at all), what now?
•
Check if your 9V is plugged in correctly (and/or soldered correctly on the board).
•
Check that you oriented the capacitors, IC’s ,transistors and diodes the right way. SMF, MKT
capacitors and resistors do not need to be oriented.
•
Check if you used the correct values of the components. For resistors you can look here:
http://www.diyaudioandvideo.com/Electronics/Color/
•
Double and triple check your soldering! A loose or cold solder can be really bad for your
board. Also check if switch enclosures do not short connections as most switches have a
metal enclosure.
•
Replace th e IC’ s and transistors, one might be defective. Before doing that first unplug the 9V
and wait 5 seconds.
•
Check that you have good/high grade components. A lot of Chinese sourced parts are fakes
(especially high end opamps, vintage diodes and transistors) so be careful that you source
your parts from reliable suppliers.