LPTJUNIOR 6 VELLEMAN
e. Auto Fade
1) Individual Channel Auto Fade
1. Press the Function key (#7), press the
▼
key (#15) 4 times ("AUTO FADE…" selected) and enter:
Channel 1 is now in Auto Fade mode ; the degree of fading is determined
by the master fader (#17). The fade value (%) is constantly going up and
down.
2. Use the numeric keypad (#11) or the
▲
/
▼
keys (#15 & 16) to select the auto fade channel.
Press Enter (#14) ; the cursor will move to the time setting:
AUTO FADE 9sec
CH 1------> 22%
3. Press the
▲
/
▼
keys (#15 & 16) to select the fade speed (21 possibilities between 0.1sec and 1min).
2) Grouped Channels Auto Fade
1. Press the Function key (#7), press the
▼
key (#15) 4 times ("AUTO FADE…" selected) and enter:
AUTO FADE 9sec
CH 1------> 22%
2. Select the desired starting channel by means of the numeric keypad (#11) or the
▲
/
▼
keys (#15 & 16), then
press the Range selection key (#13):
AUTO FADE 9sec
CH 1-- 2-> 22%
3. Select the range by means of the numeric keypad (#11) or the
▲
/
▼
keys (#15 & 16), then press Enter (#14) ;
the cursor will move to the time setting:
AUTO FADE 9sec
CH 1------> 22%
4. Press the
▲
/
▼
keys (#15 & 16) to select the fade speed (21 possibilities between 0.1sec and 1min).
Auto Fade speed and Chase speed are separate systems. Consequently, different speeds are allowed.
7. Cleaning and Maintenance
The following points have to be considered during inspection:
1. All screws for installing the devices or parts of the device have to be screwed down tight and must not be corroded.
2. The housing and connections should not be modified or tampered with.
3. The electric power supply cables must be undamaged. Have the device installed by a qualified technician.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist cloth. Do not use alcohol or solvents.
6. Have a qualified technician maintain this device. Contact your dealer for spare parts if necessary.
8. Technical Specifications
Power Supply
15Vdc / 1A
DMX signal input/output
DMX512 / 1990
DMX Signal Connector
XLR 5-pin (IN male ; OUT female)
Audio input
Line in, max. 100mV (-10dB)
Dimensions
268 x 132 x 45mm
Weight 3kg
CE certificate
ET87S-09-058
The information in this manual is subject to change without prior notice.
AUTO FADE 9sec
CH 1------> 22%
