LPTJUNIOR 5 VELLEMAN
d. Chase
1) Setting Channel Chase
1. Press the Function key (#7), press the
▼
key (#15) twice ("CHANNEL CHASE…" selected) and enter:
CH CHASE 1- 6
MAS.=100% 9sec
2. Use the numeric keypad (#11) or the
▲
/
▼
keys (#15 & 16) to set the start channel ; a range of 6 successive
channels is automatically selected. Press Enter (#14) ; the cursor will move to the time setting.
CH CHASE 1- 6
MAS.=100% 9sec
3. Press the
▲
/
▼
keys (#15 & 16) to select the speed (21 possibilities between 0.1sec and 1min).
4. Set the channel faders (#2) to the desired level and the chase will automatically run the selected channels.
5. To modify channel range or chase time during a chase, press Enter (#14) and repeat the steps above.
6. The chase can also be music-controlled: connect an audio signal to the audio connector at the back (#21) ; the
device will now react to the beat of the music.
2) Setting Chase + Scene
1. After setting a chase, press the SC key (#5) to call out a scene ; the LCD will display
LOAD SCENE _
KEYIN SC 1...40
2. Use the numeric keypad (#11) to enter a scene number and press Enter (#14) to confirm. The LCD returns to:
CH CHASE 1- 6
MAS.=100% 9sec
•
If the scene value of a channel differs from the value defined by the fader, the higher one will be selected.
•
Press any "SUB" key (#3) to send out the corresponding channel at 100%.
•
Upon exiting chase mode, the selected chase speed will be memorized automatically.
3) Setting Chase Fade
1. Press the Function key (#7), press the
▼
key (#15) 5 times ("CHASE FADE…" selected) and enter:
→
FADE OFF
FADE ON
2. Press the
▼
key (#15) to select "FADE ON" and press Enter (#14):
CH CHASE 1- 6
MAS.=100% 9sec
3. Set the channel faders (#2) to the desired level and the chase will automatically run in fade mode.
4) Setting Sub Chase
1. Press the Function key (#7), press the
▼
key (#15) 3 times ("SUB CHASE…" selected) and enter:
→
CHASE 1-6
CHASE 3-6
2. Press the
▼
key (#15) to select "CHASE 3-6" and press Enter (#14):
SUB CHASE 3-6
MAS.=100% 9sec
3. Press the
▲
/
▼
keys (#15 & 16) to adjust the chase speed and set the CH3-CH6 faders (#2) to the desired level
to control the chase ; the CH1-CH2 faders control the dimming of the selected scene.
4. To return to full chase mode, repeat steps 1 and 2 but select "CHASE 1-6" in step 2.
