Lister Petter Alpha LPW Series Скачать руководство пользователя страница 2

Страница: 2 / 40

Associated Publications

Master Parts Manual

P027-08041

LPWX4 Master Parts Supplement

P027-10641

Workshop Manual

P027-08240

Technical Handbook

P027-08247

Statement of Indemnity

The information, specifications, illustrations,

instructions and statements contained

within this publication are given with our

best intentions and are believed to be

correct at the time of going to press.

Our policy is one of continued development

and we reserve the right to amend any

tech nical information with or without prior

notice.

Whilst every effort is made to ensure the

accuracy of the particulars contained within

this publication, neither the Manufacturer,

the Distributor nor the Dealer shall in

any circumstances be held liable for any

inaccuracy or the consequences thereof.

The information given is subject to the

Company’s current Conditions of Tender

and Sale; is for the assistance of users; and

P027-08270

Copyright: Lister Petter Ltd,

Dursley,

Gloucestershire GL11 4HS, England

is based upon results obtained from tests

carried out at the place of manufacture. This

Company does not guarantee that the same

results will be obtained elsewhere under

different conditions.

Parts that have not been approved by the

Lister Petter organisation cannot be relied

upon for correct material, dimensions or

finish. The Company cannot therefore

be held responsible for any damage

arising from the use of such parts, and the

guarantee will be invalidated.

Содержание Alpha LPW Series









































Результаты поиска

Содержание Alpha LPW Series

Отзывы:

Похожие инструкции для Alpha LPW Series

Бренды по названию

Популярные бренды

Lister Petter Alpha LPW Series, Руководство оператора

Результаты поиска

Содержание Alpha LPW Series

Отзывы:

Похожие инструкции для Alpha LPW Series

Бренды по названию

Популярные бренды