16
LPW / LPWs / LPWX enGIne oPeRAtoRs' HAnDBooK
parts to stop, attempt to restart.
3.4 stoPPInG (ALL enGInes)
CAUtIon
It is recommended that LPWt4
engines run on 'no load' for 30
seconds before stopping to allow
the heat from the turbocharger
bearing to dissipate.
1. If possible, remove the load from the
engine.
2. If a variable speed control is fi tted
reduce the engine speed.
3. On engines fi tted with a fuel control
solenoid turn the key to the
oFF
position.
On engines not fitted with a fuel
control solenoid move the engine
control lever anti clockwise into the
stoP
position (fi gure 3.4) and turn
the key to the
oFF
position.
CAUtIon
turning the key to the off position
alone will not stop the engine unless
a fuel control solenoid is fi tted.
3.4 Stop control
