28/30
7.
WARRANTY
The warranty for this machine is 12 months. Warranty is only provided for the wear parts listed in the
following if the wear is not due to operation. Wear parts are parts, which are subject to an operational
wear during an intended use of the machines. The wear time cannot be defined in a uniform manner,
it differs according to the usage intensity. The wear parts must be maintained, set if necessary
exchanged in a device-specific manner according to the operating manual of the manufacturer.
A operational wear does not necessitate any claims for defect
Feed and drive elements such as racks, gear wheels, pinions, spindles, spindle nuts, spindle
bearings, ropes, chains, chain wheels, belts
Seals, cables, hoses, collars, plugs, couplings and switches for pneumatics, hydraulics, water,
electricity, fuel
Guide elements such as guide bars, guide bushes, guide rails, rollers, bearings, slide protection
supports
Tensioning elements of quick separating systems
Rinsing head seals
Slide and roller bearings, which do not run in the oil bath
Shaft seals and sealing elements
Rubbing and overload couplings, brake devices
Carbon brushes, collectors
Light release rings
Control potentiometers and manual switch elements
Fuses and lamps
Auxiliary and operating materials
Fastening elements such as wall plugs, anchors and screws
Bowden cables
Lamellas
Diaphragms
Spark plugs, glow plugs
Parts of the reversing starter such as the cable, pawl, roller and spring
Sealing brushes, sealing rubber, spray protection rag
Filter of all types
Drive and return rollers and bandages
Rope break protection elements
Running and drive wheels
Water pumps
Transport rollers for cut material
Boring, separation and cutting tools
Conveyor
Rubber scrapers
Needle felt protection
Energy stores
