17/30
3.2.
Install the extraction at the joint cutter
Position the dry extraction behind the joint cutter. Both connection rails (pos. 2) must be at
the correct height!
Connect the joint cutter and the dry extraction via the connection rail (pos. 2) and secure it
with the locking pins (pos. 1) with the spring cotter
Mount the tensioning strap (pos. 4) for securing the joint cutter and dry extraction
Note
All lines must be checked for damages and tightness before commissioning.
Connect the plug connections (pos. 5) of the hydraulics with the joint cutter
Connect the control voltage (pos. 6) of the extraction at the plug socket of the joint cutter
Mount the suction hose to the suction container and mount the other end to the blade
guard (pos. 4)
1
2
3
5
6
4
4
