Lissmac SBM-XS 300 G1E1 ALU MIX, Руководство по эксплуатации, Страница: 10 / 53

Safety
10 Grinding machine SBM-XS 300 G1E1 ALU MIX
2.6 Maintenance, Service and Troubleshooting

Adjustment, maintenance and service work may only be carried out by
authorised technical personnel.

Perform adjustment, maintenance and service work according to instructions
in the operating manual. Keep the specified intervals for service work.

Inform operating personnel before beginning adjustment, repair, or
maintenance work. Name a surveillance person.

Always disconnect the machine from electrical power during maintenance
and repair work (main switch in the "Off" position).

When the machine is being cleaned of material residues, always disconnect
the machine and the extraction system from the mains supply (set main
switch to "Off").

Before cleaning with cleaning agents, close all openings with suitable
materials in which no water or cleaning agent can penetrate, for safety or
functional reasons. Electric motors and switches are especially at risk.

Do not perform any cleaning with high pressure cleaners.

Openings which were sealed before cleaning, must be completely opened
after cleaning.

Always tighten loosened screw connections with the specified tightening
torques during maintenance and service work.

If safety equipment is dismantled during changeover, maintenance, service
and repair, remount and check the safety equipment immediately after the
work is completed.

Dispose of operating and auxiliary materials and replacement parts safely
and in accordance with country-specific regulations.