Lissmac SBM-XL 1000 G2S2-60, Руководство оператора, Страница: 49 / 67

Maintenance and Cleaning
Grinding machine SBM-XL 1000/1500 G2S2-60 49

Place new abrasive belts on the back guide plates and pay attention to
the correct running direction.

To tighten the abrasive belts of the grinding units 29, 30, 32, and 33,
screw on the tensioning screw up to the mark and secure with the
counter nut.

Screw on the front guide plate on the upper grinding units 29 and 30.

Make sure that all abrasive belts run lightly on the guide rollers.

Swing the grinding units 29 and 33 towards the inside and lock the lever
on the grinding units.

Close both doors 8 and 11 on the output side of the machine.
The changed position of the grinding units is reset after changing the
abrasive, if the display in the »Tool change« menu is selected.

In the »SBM-S« menu select the »Tool change« field and confirm the
prompt.
Putting on new
abrasive belts