Lissmac SBM-XL 1000 G2S2-60, Руководство оператора, Страница: 28 / 67

Preparation for use
28 Grinding machine SBM-XL 1000/1500 G2S2-60
4.3 Installation and assembly
The machine must only be installed in an indoor space, which meets the
following conditions:

Fortified level floor with sufficient load carrying capability

Temperature range: +10° to +40 °C

Humidity: 5 – 95 % (not condensing)
4.3.1 Installing machine

Fasten the lifting gear to the four attachment points 1.

Remove the packaging from the machine.

Adjust the machine feet 6 until the machine is horizontally level.
4.3.2 Connecting the machine electrically
DANGER
High voltage
Death or injury from electric shock

Only trained electricians may perform the electrical connection and work
on the electrical system of the machine.

Make sure that the main switch is in the »Off« position.

Connect the machine to the power supply.

Place the main switch 13 on the back of the machine into the "On"
position.

Turn on the control voltage with the key switch 18 under the touch
screen.

Make sure that both »EMERGENCY STOP« buttons, 12 and 23, are
activated and a possible EMERGENCY STOP is acknowledged with the
20 button.

The »Start system« button 17 is illuminated. The machine is ready for
operation.
The machine is delivered ready for connection to a right-hand power supply.
After the electrical installation the running direction of the motors must be
checked. If the running direction of the grinding units does not match the
marks on the machine, the phase must be changed.