Lissmac SBM-XL 1000 G2S2-60, Руководство оператора, Страница: 35 / 67

Operation
Grinding machine SBM-XL 1000/1500 G2S2-60 35
5.6 Setting feed
The grinding results of the SBM-S grinding units are dependent upon the
feed speed, among other things. The following setting values can be used as
a guideline for the feed speed:

Normal setting: approx. 1 m/min

Large edge rounding: slow feed speed

Small edge rounding: fast feed speed
In normal operation the workpieces first move through the SBM-G grinding
units and then the SBM-S grinding units. This presets the feed direction by
arrangingthe grinding units. If necessary the feed direction can be reversed
for example, to remove workpieces from the machine.
The direction and speed of the following components are set commonly:

Conveyor belt on the input side of the machine

Feed rollers in the machine

Conveyor belt on the output side of the machine

Feed capable of being turned on by customer (if available)
CAUTION
Conveyor belt on the input side
Cutting of fingers when putting on the workpiece

Wear protective gloves

Do not reach into the input opening for workpieces.

Lay workpieces on the front edge of the conveyor belt.

Set the feed speed on the variable controller 22.

To turn on the feed, turn the variable controller 21 to the »forwards« or
»reverse« position.
Feed is started along with the grinding units using the » Start system«17
button.

To turn off the feed, turn the variable controller 21 to the middle position.
Feed speed
Feed direction