Lissmac SBM-XL 1000 G2S2-60, Руководство оператора, Страница: 23 / 67

Product description
Grinding machine SBM-XL 1000/1500 G2S2-60 23
3.4 Function
Grinding units for grinding surfaces (SBM-G) and for rounding the edges
(SBM-S) are combined in the SBM-XL G2S2 Grinding machine. Grinding
units are each installed in pairs up and down. In this way the workpieces can
be processed on both sides in one work step.
The workpieces are guided into the machine up and down by feed rollers
and transported between the grinding units.
Each of the four grinding units can be switched on or off individually, as is
required for the processing of the workpieces.
Abb. 9: Grinding units and feed rollers (sectional side view)
24 Upper rear SBM-G grinding unit
25 Upper front SBM-G grinding unit
26 Upper feed rollers
27 Lower front SBM-G grinding unit
28 Lower rear SBM-G grinding unit
29 Upper rear SBM-S grinding unit
30 Upper front SBM-S grinding unit
31 Lower feed rollers
32 Lower front SBM-S grinding unit
33 Lower rear SBM-S grinding unit
Grinding units can be
individually selected.