Lissmac SBM-XL 1000 G2S2-60, Руководство оператора, Страница: 47 / 67

Maintenance and Cleaning
Grinding machine SBM-XL 1000/1500 G2S2-60 47

Level 4 user log in

Select »Service« in the main menu.

Select the motor whose belt should be run in while paying attention to
the instructions on the touch screen.

Start the motor by pressing the »Motor symbol« button and make sure
that all the grinding belts run in the middle of the drive belts.
If necessary align the deflection rollers to the grinding units with the aid of
set screws. For this the clamp screws on the deflection rollers must be
loosened. The deflection rollers must be aligned so that the abrasive belts
run on the drive belts. Only perform this work with the motor turned off!

If the position of the deflection rollers must be corrected, turn off the
motor and secure against accidental starting.

Perform adjustments and the check.

Proceed in the same way for the other belts while paying attention to the
danger zones.

Stop the machine by pressing the »Stop system« button 19.

Swing the front grinding units 25 and 27 towards the inside and lock the
lever on the grinding units.

Close both doors 4 and 7 on the input side of the machine.
The changed position of the grinding units is reset after changing the
abrasive, if the display in the »Tool change« menu is selected.

In the »SBM-G« menu select the »Tool change« field and confirm the
prompt.
Checking running of
the belt
Closing the machine