Lissmac MULTICUT 550 GH, Руководство по эксплуатации

Страница: 51 / 92

51/92
7.14. Conversion from left- to right-cutting
WARNING
Cut and crush hazard from rotating saw blade
When touching the rotating v-belt, hands and clothing can become entangled and pulled in, resulting in cut
and crush injuries including dismemberment.

Do not open or remove the blade guard or touch the saw blade while it rotates.

Only perform this work with the engine turned off and secured against inadvertent reactivation.
Sequence
 Raise cutting shaft to top position and remove ignition key.

Uncouple water hose at top (Pos. 1).

Remove blade guard, diamond blade and flange (see 4.5).

Loosen hex bolt (Pos. 3) and remove flange guard (Pos. 4)
 Remove water cooling flange cover (Pos. 5) and mount it on the opposite side
Pay special attention to the correct seating of the o-ring !

Switch GEKA water hose connection at top of gearbox (Pos. 1)

Hang water pump on other side of machine
 Reconnect water hoses
 Install diamond blade and pressure disc (Pos. 6)

Reattach blade guard and secure with bolt (Pos.7)

Flip steering rod (Pos. 8) and align with diamond blade
1
3
4 5
6 7
8