Lissmac Compactcut 900, Руководство по эксплуатации

Страница: 30 / 56

30/56
5. OPERATION
5.1. Safety
DANGER
Removing and opening the saw blade protective hood
Death or injury from rotating saw blade.
 Removing or opening of the saw blade protective hood or reaching into the rotating saw blade
during cutting is prohibited.
 These works may only be carried out with the saw blade at a standstill and the combustion motor
turned off.
DANGER
Load capacity of the cutting surface
Death or injury from tipping over or falling.
 Ensure that the floor on which cuts are to be made fulfils load carrying capacities.

When cutting, ensure that the Floor saw and personnel are not standing on the side to be cut off.
WARNING
Cutting process

The operator contracted with cutting must start the forwards movement using the joystick,
operators are restricted to standing only in this area of the Floor saw.

The Floor saw may only be operated by one person, direct other people away from the cutting
area or block the area off.
DANGER
Tighten / release saw belt
The saw blade is started immediately when the machine is started, if the drive belts are not released
beforehand. Danger for persons and objects located in the danger zone. The saw blade can be damaged.

After switching on the Floor saw tension the drive belts using the tensioning lever
 When turning of the Floor saw (end of work), always release the drive belts via the tensioning
lever!
This way drive belts are preserved and the service live of the drive belts is increased.