Lissmac Compactcut 900, Руководство по эксплуатации

Страница: 13 / 56

13/56
1.4.3. Operation
Refrain from working in any manner that is questionable in regard to safety!
Take measures to ensure that the Floor saw is operated only in a safe, functional condition!
The Floor saw must be checked at least once per shift for externally identifiable defects or damages!
Any changes which occur (including operating behaviour) must be reported immediately to the
responsible post/person! If necessary, immediately stop the machine and secure it against restart!
Immediately stop and secure the Floor saw in case of malfunctions! Immediately correct
malfunctions! Electrical work may only be carried out by qualified electricians.
Only suitable and tested tools must be used.
For protection before acceleration, move the depth setting of the saw blade slowly into the solid floor.
Avoid any contact with the running tool.
It is prohibited to cut without the saw blade protective hood or the drive motor cover. The operator
must be protected by turning parts.
1.4.4. Moving the Floor saw
The Floor saw may only be moved when the saw blade is at a standstill.
Before leaving the operating position on the Floor saw, the combustion / electric motor must be
switched off and the saw blade must be at a standstill.
There is a danger of injury by a rotating saw blade.
The operator may not leave the Floor saw if the parking brake has not been activated.
The Floor saw must be secured against rolling away.