Lissmac Compactcut 900, Руководство по эксплуатации

Страница: 15 / 56

15/56
1.5.2. Electric power
Use only original fuses with the specified current rating! In case of malfunctions, turn the Floor saw
off immediately! Electrical work may only be carried out by technical and qualified personnel.
Carry out maintenance or repair work only when the motor of the Floor saw is turned off and the saw
blade is not running any more. Transport position requires special care.
The machine's electrical equipment must be inspected/checked regularly. Faults such as loose
connections or damaged cables must be corrected immediately. The machine must be labelled so that
it cannot be started by others.
1.5.3. Dust
When working in close quarters, follow any applicable national guidelines!
To prevent dust build-up during cutting, the saw blade must be wetted and cooled using water.
Dry cutting is prohibited and damages not only the saw blade.
1.5.4. Noise
See Chapter 2.4 Noise power level
1.6. Transport
To implement using a crane, slinging equipment with sufficient load carrying capacity must be used.
Slinging equipment must be checked for damage before use.
Name expert instructors for the lifting process!
Lift the Floor saw only according to the instructions in the operating manual and with proper lifting
gear!
Only use suitable transport vehicle with sufficient load capacity!
Secure loads reliably according to the regulations. Use suitable attachment points!
Even when moving only for a short distance, the motor of the Floor saw must be turned off. The saw
blade may not be rotating before a restart!
When recommissioning, follow the operating manual!