Bluetooth Pairing
Before you can start streaming Audio to your
shower you must fi rst establish a connection
between the shower and the device that will
stream the audio to the shower; this is called
Pairing. You can stream up to 10 meters away,
depending upon interference of walls etc.
Most devices that are Bluetooth Audio Streaming
enabled can be connected to the shower, such
as Smart Phones (Andriod, iPhone etc), Tablets
(Galaxy Tab, iPad etc) and even computers and
Laptops.
1: Press the BLUETOOTH Button on the control pad.
The display will now say BT.
2: On your Smartphone/Tablet etc, go to the
Bluetooth settings (If unsure, refer to your manual
for more information on how to access this)
3: Ensure Bluetooth is active/running on your
device.
4: Initiate a SEARCH/SCAN for New Devices to Pair
to.
Due to the various diff erent number of devices that have
Bluetooth, and the variations on the implementation of
Bluetooth enabled in your device we are unable to guarantee
connectivity or to provide support for connecting, however the
product has been tested on a number of Apple and Android
Tablets and Phones with complete success.
5: After a small amount of time you should see
the device name of the shower appear “ SPROUT”.
Select this to complete the Pairing of the two
devices.
You are now ready to stream audio. Go to your
music playing App, choose a track and press play.
Once Paired you can stream music at any time to
the shower. Only once device can be Paired at any
time.
33
Whirlpool Operation
NEVER ACTIVATE THE WHIRLPOOL SYSTEM
WITHOUT WATER IN THE BATH AS THIS WILL
DAMAGE THE PUMP
Fill the bath with water to your desired
temperature. The Whirlpool system does NOT heat
the water.
Do not over fi ll the bath tub as the
force of the water when the whirlpool is activated
may cause the water to overspill, and additionally
the air intake required for the whirlpool bath may
malfunction with very high water levels. When fi
lling the bath tub, consider the amount of water
displaced when you enter the bath also.
NEVER USE BUBBLE BATH OR OTHER PRODUCTS
THAT ARE NOT SAFE FOR USE WHEN OPERATING
THE WHIRLPOOL.
Because of the pumping of water though a pump,
using bubble bath products cause large amounts
of foam. This foam may not only spill over the bath
tub, but its eff ects are damaging on the whirlpool
system as a whole and stress the whirlpool pump.
WHIRLPOOL OPERATION
There are two whirlpool control dials on the top
lip of the bath tub.
Press the START/STOP button to activate the
whirlpool pump.
The second dial control the power of the pump.
Rotate the dial from MIN to MAX to the desired
amount of force the water is pumped out of the
jets.
