10
2. LEVELING AND FITTING THE TUB
Remove the protective fi lm covering the tub base.
Connect the soil pipe, trap and any couplings to the fl exible waste under the tub. You may choose to
fi t either a HEPV0 trap with the appropriate couplings or choose to fi t a McAlpine ST28M coupling to a
McAlpine 28-NRV trap.
Position the tub base in what will be its fi nal location and adjust the feet until the base is level. You can
raise/lower the feet under the tub and with a spirit level laid across the tub, ensure the tub is level.
Now fi ll the base with some water and check that the water fl ows adequately to the plug and exits
satisfactorily. If the water does not fl ow to the plug fully, then you will need to increase the fall on the
tray by adjusting the legs. If the water does not exit the waste section fast enough, then ensure there is
suitable fall in the waste pipe and/or no blockage or kinks in the pipe work.
Check and attend to any leaks.
Now slide the tub away from the wall to allow access all around the shower as you assemble.
This product is freestanding so you do not need to fi x the feet to the fl oor.