Liros GrainWatch HCS GDC D1, Техническое описание

Страница: 11 / 12

HCS GDC D1
TECHNICAL DESCRIPTION
APRIL 2019
11
In case you mount two sensor units, place them sym-
metrically / evenly spaced about half of the dryer’s full
width between the two.
Example: When Dryer full width = 4meter, distance
between Sensors should be 2 meters.
HCS 4/3 is designed to be easily mounted without
tools. Tighten screw “2” and unscrew the two screws,
called “3” slightly. Insert the HCS 4/3 inside the air
beam / air member.
The Sensor should rest in the triangular opening,
and the lip underneath must be inside the dryer.
Adjust screw “2” until the unit is horizontal then
handtighten screws “3” and make sure the sensor is
pointing straight into the air-beam / air member.
Tighten the screws until the HCS 4/3 is completely
fixed, but do use too much force. Overtightening may
affect the unit’s brackets negatively.