Liros GrainWatch HCS GDC D1, Техническое описание

Страница: 6 / 12

HCS GDC D1
TECHNICAL DESCRIPTION
APRIL 2019
4. Restart Mode
6
Restart is used when the drying process has been
stopped and should be restarted. The control will
then switch to Manual mode with the setting from last
manual run.
The drying now runs for 60 minutes on Manual,
and then on Auto with the setting used for the last pre-
vious auto run. The process continues as a standard
auto run.
When Restart is used the Percentage setting cannot
be changed. If requested, “Cancel” can be pressed to
return to the start page in which Manual mode can be
chosen to make the adjustment.
Once Restart is pressed again, a new 60 minute
manual run is restarted and switched over to Auto
mode, and so on.
Press “Restart”
Step 1
Please write down the settings to facilitate for the next occasion
the same kind of cereals are dried.
PV
: Shows the signal from the sensor.
Man : Shows the percentage set.
Feed Out : Lights up yellow when output is
active.
Restart time : Shows the number of minutes
left before the control switches to Auto.
Cancel: Press to exit Restart and go to the
Home screen.
Step 2