9
432-LIPPERT (432-547-7378)
Rev:06.30.22
JT’s Strong Arm
™
Travel Trailer
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-002345
C-Channel with tubular cross-members and/or with
underbelly
1.
Prepare spacer mount as described in Step xx. Rotate
stabilizer tubes toward center of chassis and upward to
cross-member identified in Step xx.
2.
Using the spacer mount as a template, mark the
mounting holes by aligning one short edge with the center
of the cross-member. Make sure the spacer mount is
parallel to the edge of the rear cross-member.
3.
Center punch and drill an
3/8
” pilot hole at each
mounting hole location.
4.
Drill out the hole closest to the rear jacks to
5/16
” and tap
using either a
3/8
”-16 tap or
3/8
”-16 x 1” self-tapping bolt.
5.
Lubricate as needed.
6.
Secure spacer mount to bottom of rear cross-member
with a
3/8
”-16 x 1” self-tapping bolt, taking care to keep
the remaining pilot hole centered in the mount-ing of the
spacer mount.
7.
Tighten bolt securely.
8.
Drill the remaining pilot hole out to
5/16
” and insert a
3/8
”-
16 x 1” self-tapping bolt and tighten.
9.
Repeat for the opposite side.
8.
After removing the locking pliers, attach swing-bolt to
remaining mounting hole with a
3/8
” locking nut and washer
(Fig.12)
.
9.
Repeat for the opposite side.
Fig.12
